The Creedmoor Forum

Nice shooting..

Gave the plastic furniture a paint job on the cz yesterday.. played with it a little this morning.. 2 or 3 mph cross breeze.. shot kyl at 50 and ran it a couple times then a 2 inch swinger's at a hundred.. then a 3 inch dueling tree at 140.. a 6 inch and 4 inch swinger at 175 and finished with a 10 inch and 6 inch round gong and a gopher plate at 250.. 35 minutes of up at 250.. pretty fun..

Cool looking range

Think I got a load for my prc this afternoon that suits me.. I loaded a small ladder with rl23 and 180 bergersplus I loaded 4 rounds in the middle of my ladder to put a little heat in the barrel.. as luck would have it the 4 rounds I loaded to heat the barrel was right in the node.. I shot them at 450 yards same as I shot my ladder and as I was shooting them they just kept stacking on top of each other.. I thought about not even shooting the ladder but I did any way.. after shooting the ladder it showed my node at 64.8 and 65.1 gr. My four rounds to heat the barrel was loaded at 64.8..
Here's the 4 I shot on steel to heat the barrel.. 3 of them are on top of each other and one out maybe 3/4 of a inch.. these chronoed at 3018fps average.

My little cz is going through another transformation.. my lilja 26 inch barrel is about ready to ship and I'm upgrading the scope on it to a 5x25x50 gen 2 pst with the ebr7c retical.. I will be running with the big dogs after these upgrades.. lol

Give them hell dave

Quote from: DHuffman on May 13, 2024, 07:56:39 AMI'm beyond happy with my Garmin, not sure what it would take to make me try the mini lab at this point.

Same here..

I sort the sk+ by the weight of each round

Yesterday afternoon when I was testing my sort I didn't feel like my gun was shooting as good as it normally does so about 9 pm I went out and thought I would check the chamber to see if I might have a carbon ring forming.. sure enough I had a bad one.. so I took the thrro clean stuff to it and removed the carbon ring and just went ahead and cleaned the entire barrel.. knowing I would have time to foul the bore back in with a box of shells before I went to the match.. so I took a box of the 51.6 weight out this morning and shot them. The worst bunch of the sort yesterday.. after about 25 rounds it started printing 5 shot one hole groups.. I thought yep that carbon ring was the culprit.. done had the 51.3 and 51.4 rounds in my bag and loaded everything up.. before I left I thought man I should take a box of the 51.6 with me just in case.. walked out of the house and jumped in the truck and took off.. got to the match and thought dang I didn't grab the 51.6 box.. some as I started shooting my sighters I knew I was in trouble.. neither 51.3 or 51.4 shot very well.. but I did have about 18 rounds of 51.7 in my bag.. I ran the kyl rack twice with them then had to go to the 51.4 weight and the wheels fell off the rest of the match.. lesson learned.. keep a eye on the carbon ring and take the right sort for the condition of the barrel..

I sucked at that match this morning.. finished dead last.. pretty much self inflicted 

You might try to get that vertical out of it with powder charge changes..

Thanks bob..

The wind laid enough to do a little testing of my sort to see which bunch shot the best.. I will be shooting 51.3 and 51.4 tommorow


It's cool to me to see how the sort opens up and goes vertical then closes back up.. alot like powder charges in a center fire

Thanks dave..

Got another 22lr match in the morning.. was wanting to get a little practice in today but we have had 20+ mph winds all day.. hoping they lay a little this evening..

Question for ya chris.. did you brush the necks before or after annealing