Skip to main content
Topic: shell holders (Read 96 times) previous topic - next topic

shell holders

Hi a quick question . Does it matter what number shell holder you use for the press , as long as the case fits into it . ie my RCBS dies says use a number 3 and the LEE i have says a 2 , But the cases fit into both .

Wanting to use the RCBS I travelled a fair distance to go and get a number 3 as per the RCBS box thinking that LEE + RCBS use different numbers for the same calibre , in this instance 6.5cm , Only to be given a Hornady number 2  by the gun shop owner , He said  it was the correct holder .

Re: shell holders

Reply #1
I use a number 2 shell holder for all 0.473" bases...which is correct for the CM.  I don't remember what brand of shell holder I have (I think both Lee and Redding) but they all say #2).  You should be good.
Bob
If everything seems under control......you're just not going fast enough

Re: shell holders

Reply #2
Same here.. a number 2 for all my .473 size case heads.. all mine are lee shell holders.. keep in mind the deck height may vary between different shell holders even within the same brand..
Grant

Re: shell holders

Reply #3
I believe the Hornady shell holder is #1 and the Lee is #2 for 6.5 Creedmoor.  They are different heights however. 

Roaneman


 

Re: shell holders

Reply #5
Usually a good idea to use the brand of shell holder that matches your press manufacturer. Unless you are using a Forster COAX. 😊


Re: shell holders

Reply #6
Will do thanks everyone , i have a LEE press and shell holders apart from the No 2 hornady i was given to use , its still packaged so i know which one it is .
And thanks for the link i will get it printed .