Skip to main content
Topic: Rear bag rider for the orxy (Read 204 times) previous topic - next topic

Rear bag rider for the orxy

The only complaint i have with the orxy chassis is the butt stock isnt very rear bag friendly.. so i set out this morning to remedy that problem and came up with this bag rider.. took some aluminum i had and cut a 5 1/2 inch long piece by 1 1/4 inches wide. 1/4 inch thick.. drilled and tapped the bottom of the butt on the orxy and then drilled and counter sunk to holes in the plate.. rounded all the edges on the plate and mounted it.. turned out pretty good and think it will work great..
Grant

Re: Rear bag rider for the orxy

Reply #1
Good job Grant!

Re: Rear bag rider for the orxy

Reply #2
I wish I was that handy.  I screw up buttering my toast.
Need to do that with my MPA chassis.

Re: Rear bag rider for the orxy

Reply #3
Gregg is your mpa chassis not compatible with their enhanced bag rider ?
Grant

Re: Rear bag rider for the orxy

Reply #4
That's some fine work there Grant. A little truck stop aluminum polish would make it shine like a diamond in a goat's ass and slide all the better.
Dave

Re: Rear bag rider for the orxy

Reply #5
Grant, they came out with the comp version a year or so after I got mine.
It doesn't have the holes in the bottom and would have to drill some or one
in the bottom. Not much room down there.

Re: Rear bag rider for the orxy

Reply #6
Decided to paint my bag rider.. i think it looks better and still plenty slick with the clear coat on it..
Grant

Re: Rear bag rider for the orxy

Reply #7
Looks good, G
Guess I have to print little groups with my good looks and talent... Lol    :o

Re: Rear bag rider for the orxy

Reply #8
Thanks gregg... I'll give ya the talent part..🤣
Grant

Re: Rear bag rider for the orxy

Reply #9
New idea for a rear bag rider for the other 2 orxy chassis i have. Got some 3/4 inch stainless steel round stock  and had the ends milled down half way through them creating a flat area to mate up with the butt stock. Will drill 2 holes in each one . Then drill and tap the chassis to mount them.. think it should work good.. ;)
Grant

Re: Rear bag rider for the orxy

Reply #10
I like it Grant!
Dave

 

Re: Rear bag rider for the orxy

Reply #11
Yeah thats going to work nice... ;D
Grant

Re: Rear bag rider for the orxy

Reply #12
I agree, that will go to the bottom of the V in the bag and track.
Dave

Re: Rear bag rider for the orxy

Reply #13
Reminds me I need to work on something for my Stealth factory stock. I want to use UHMW though, and make it shorter. 
I was going to get a MDT stock during the last big sale, but it never worked out. Need to improvise.