Skip to main content
Topic: Horizontal stringing (Read 1099 times) previous topic - next topic

Horizontal stringing

I just recently started shooting with a bipod at the bench. I was using a rest before and all seemed fine. Any of you bipod users experiencing any horizontal stringing. I've tried to make sure my hold is square and tight on shoulder etc.. .I'll try prone position vs sitting and see if that helps. Any input would be welcome.

Re: Horizontal stringing

Reply #1
Figured it out. What was happening was, initial pointing down range without looking threw scope was close but when I would twist slightly left and right the feet were staying put and the springs twisting slightly so when firing the torque twist was off center axis going backwards. I'll either make my own aluminum flat feet or be careful when siting on target etc.