To support the forum with your donation, please check https://tinyurl.com/4vv24dup.
Started by gman47564, July 02, 2021, 03:51:51 PM
Quote from: gman47564 on July 03, 2021, 07:29:11 AMChanged the load on my evolution 6 creedmoor a little today.. added .2 tenths of rl 16. Back to the original charge. I had dropped the charge several months ago by .2 tenths to keep it in tune.. withe the aggressive cleaning I gave it i needed to add that back.. the change helped.. got it back under half moa.. (top left two groups)Wanted better so i did a seating test from .015 off to the .040 off in my first two groups in .005 increments.. looks like .025 off is where it needs to be.. thats around 1/4 moa.. with throat growth in the rifle that puts me back to almost my original load and jump.. target is at 250 yards
Quote from: LeadHammer on July 03, 2021, 06:03:11 PMI wonder then, barrel break in speed increase, is actually not barrel break in, well same effect but different cause.
Quote from: gman47564 on July 03, 2021, 12:24:37 PMBob my 6 creed lost about the same as your 6.5 did.. 30 fps or so.. i have about 60 rounds loaded with the lesser charge weight.. im going to load a 100 rounds (it may take 150) with the original charge.. the one i shot today.. im thinking by the time i shoot the 100 rounds up then the lesser charged rounds should be good to go again.. once them are shot up i will give it another bare metal cleaning and just shoot the original load and maintain the cleaner barrel and compensate for lands growth as it moves forward..
Page created in 0.101 seconds with 28 queries.