News:

To support the forum with your donation, please check https://tinyurl.com/4vv24dup.

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - NightForce

#1
Quote from: gman47564 on May 07, 2022, 03:12:38 PMTry measuring the neck on a fired 6.5 creedmoor case and then measure the neck on one of your 308 cases with a bullet seated in it..

BINGO! It's a numbers game but with a little planning and patience things will prove or disprove your actions.
#2
Reloading / Re: .264 Bullets In Stock
May 07, 2022, 01:49:15 PM
Everything's returning to the shelves but the prices are at least double. I was at Bass Pro today and saw 12 gauge 3 1/2 shotgun shells for $79.95 for 5 boxed shells.
#3
Reloading / Re: Brass Cleaning
May 05, 2022, 07:04:06 AM
I'll be the odd man out but I still clean mine in a Lyman 1200 vibratory tumbler with crushed corncob and walnut media purchased in bulk at Harbor Freight. I add a couple of tablespoons of Flitz Multi-Purpose Polish and this does a great job cleaning each case thoroughly inside and out.
#4
Reloading / Re: Reloadingoutdoor.com
March 15, 2022, 07:52:23 AM
From what I gather avoid this site like the plague!

#5
I believe they start in the range of $3,800
#6
General Discussion / Re: Every Morning about 7:15...
February 10, 2022, 12:21:53 PM
Having fallen through the ice 3 times as a kid, I no longer look forward to how I felt when 32 degree water hit my skin, it actually stung a bit...
#7
Gunsmithing / Re: Polish Feed ramp
February 02, 2022, 07:48:58 AM
Easy? This really depends if you can get a felt polishing tip in there.

I've done several using a Dremel with a felt tip and various grits of diamond compound. AR barrels are super easy to do but bolt guns can be a challenge depending on the room.
#8
General Discussion / Re: Cant believe i just done that..
February 02, 2022, 07:39:11 AM
Nice to see Vortex stepping up even when the human in us rears its ugly head! Good luck and lets see some groups when you get a chance!
#9
45ACP of course!
#10
General Discussion / Re: My New Range
January 24, 2022, 03:34:58 PM
You are SO lucky/fortunate!
#11
Gunsmithing / Re: Barrel Threading
January 24, 2022, 06:32:29 AM
Truth is he probably doesn't know how to thread on a lathe.
#12
Reloading / Re: Primer pocket uniformity?
January 22, 2022, 05:08:14 AM
Quote from: Rob01 on January 02, 2022, 09:47:20 AMAnd a real accuracy shooter weighs each primer separately to make sure there is the exact same amount of priming compound in each. Lol

I didn't think anyone saw me!  ;D
#13
General Discussion / Re: Nature's Best (pics)
January 21, 2022, 11:11:17 AM
OK, I'll toss one of mine in!

#14
Reloading / Re: Cartridge Overall Length (COL) sampling
January 21, 2022, 06:34:04 AM
To begin loading for a new rifle, I had to take some initial chamber measurements to determine its boundaries.

MCOAL: This is the distance from the bolt face to the bullet tip with the ogive touching lands.

COAL: This is the distance from the bolt face to the bullet ogive touching lands using a precision fixture mounted to a digital caliper.


#15
Reloading / Re: 210M Primers
January 20, 2022, 04:09:03 PM
Initially, I accepted the reason (excuse) ammunition shortage was due to hoarding, Covid shutdowns, supply, etc, etc, etc. A lot of time has passed but I'm seeing stock reappearing BUT the prices are at a minimum 3X to 10X the price of only 3 years ago.

I have powder containers with price stickers $25-$29/pound. Today the same powders are $45-$55/pound.Primers used to be $19.99/1000 and now they're $129/1000.

Greed aside, the bottleneck is much higher than the local gun shops.