pics of your rigs

[bowfishn]

Just added a Magpul Gen 3 PRS butt to my 10BA Stealth, didn't use an adapter. The LOP is 15" to 16.5" , the adapter adds about 3/4" of length to the LOP, which would make it 15.75" to 17.25" . Here is what it looks like. I used the original Commercial Tube on it that is .020" bigger than a Mil Spec tube. I recommend buying a mil spec tube because I had to sand out some of the material inside the Stock to get it to slide on easier. It is still tight, without the adapter they sell for around $50.00 it is not as clean looking but it functions better if you ever want the LOP shorter than 15.75" , the stock comes with two pieces that allow it to either go on a round tube or an adjustable type tube like come with the Stealth. Anyways just letting you know what has to be done to use it.

[BMWguy206]

This is my first bolt-action rifle:
Bergara HMR in 6.5 Creedmoor
SWFA 10x42 MOA-Quad Reticle
NightForce Steel Scope Base 20MOA
NighForce UltraLight Low Rings
Area 419 HellFire Muzzle Brake
Harris Bi-Pod

[Slo cat]

My new Tikka T3x Tac A1 with a SWFA SS 10x42 scope, milrad, 6.5 CM.  Burris XTR rings used to get 20 MOA head start for long range.  3rd mag on the way to me.  Has not been shot yet as I have been busy getting ready for a trip to Front Sight and then the SHOT Show.

[jvw2008]

Think you need to send that to me for a few weeks. We'll get your barrel conditioned and a load worked up and have it ready to go when you get back from the SHOT party. ?

[LC 6.5 Shooter]

New RPR with Krieger 26" 6.5CM barrel (sniper grey cerakote). Seekins 15" rail. LRI bolt shroud. Anarchy Outdoors bolt handle and grenade knob (sniper grey cerakote). Timney Trigger. MPA vertical grip. Luth-Ar buttstock (sniper grey cerakote) with limbsaver recoil pad. Wiebad cheek rest pad. Accu shot mono pod. American Defense Recon Mount. Sig Sauer Tango 4 Scope. Accutac Bipod. Pretty stoked on how it turned out!

https://photos.app.goo.gl/wWGkX0gTO3dU83kr2

https://photos.app.goo.gl/s1UgGpUx8r7ZUltN2

https://photos.app.goo.gl/UC2FZIgsjHPMUA943

[MattimusPrime]

Savage 10 fcp-sr 24" 1:8. Athlon Argos BTR 6-24x50. Vortex TRM 30mm rings. Kydex cheek rest. 

[VA-XBolt]

Finally got a couple of pics of the newest addition to the stable, an Accurate Ordnance TMR:

Stiller Precision Action Receiver, Stiller pinned recoil lug, tactical bolt knob, 20-MOA base (8-40 screws and two pins)
Accurate Ordnance Varmint (Sendero) 24" barrel by Hawk Hill, 1:8 twist
McMillan A5 Adjustable stock, 50% Medium Tan  25% olive 25% Light Tan, Marble Finish
Hawkins Precision bottom metal, Pillar Bedded,
Trigger Tech Special trigger; set to 2 lbs
Vortex Razor HD II, 4.5 - 27x56 FFP, EBR-2C MRAD Reticle, Vortex Precision Matched Rings (1.1")
Atlas PSR Bipod, Picatinny Mount, QD Level, w/rubber and spike feet

Still working through barrel break in, using Hornady 140 ELD-M factory loads. If I do my part, it's holding .25 MOA 3 shot groups. Hoping to get out again tomorrow afternoon for some more range time, and then as soon as I get my new workbench area finished, I'll get on to load development.

[sean30ber]

Id say "thats a keeper"  Very nice!

[VA-XBolt]

Yup. So far have been very happy with it. I just need to be able to get out on a longer range. My local 1000yd plus range is public, but only for the shorter ranges. The long range is members only, and I'm on the waitlist for that one.

I've got a 100yd indoor range about an hour away, so even when the weather is nasty, I can shoot. Just a bit of a wait for lanes on the weekend, and I won't get there today as I had hoped due to some other issues.

[Skel]

Hey everyone,  new Canuck member here.  I'm new to the precision game and recently started reloading rifle and pistol.
Just got my Bergara HMR in 6.5 CM and mounted a decent optic.  Hoping to learn a lot here and share my experiences.
Plan on using it for competition and hunting

[/URL][/img]

[LC 6.5 Shooter]

New MPA BA 6.5CM.

https://photos.app.goo.gl/wLFxNOv36uTRQ1B52

https://photos.app.goo.gl/A01uENZ3FbnFuyRI3

https://photos.app.goo.gl/ftkUXLMt3G7P4sAv1

[Cold Trigger Finger]

Hey everyone,  new Canuck member here.  I'm new to the precision game and recently started reloading rifle and pistol.
Just got my Bergara HMR in 6.5 CM and mounted a decent optic.  Hoping to learn a lot here and share my experiences.
Plan on using it for competition and hunting

[/URL][/img]

 Skel ; Welcome to the Creedmoor forum. Nice looking rifle. What is the optic ?

[stevieb92]

My recent build updated with XLR Envy chassis. 

Trued Rem 700 by Southern Precision Rifles
Pinned recoil lug by Short Action Customs
Hawk Hill Heavy Palma barrel chambered in 6.5 Creedmoor, 26 inch finish length with 5/8-24 threads by Southern Precision Rifles
Southern Precision Rifles BugNut System
Patriot Valley Arms Mad Scientist muzzle brake
Bolt fluting by Long Rifles Inc.
Bolt Knob by Paul @ Pro Precision Rifles
Bushed Firing Pin Hole by Gre-Tan Rifles
Vortex Viper PST Gen 2 5-25X50 FFP EBR-2C mrad reticle
Seekins Precision 20MOA Scope Rail
Seekins Precision Low Rings
Trigger Tech trigger set @ approx 2 lbs.
ATLAS CAL bipod w/ADM qd mount
XLR Envy Chassis w/Tactical buttstock

Rifle:


Random load:


My version of the 10 shot load development (using 12 shots):
All 12 shots are in .54 MOA @ 100 yards.  40.4 gr to 42.6 gr.  Using this process, the upper node looks to be between 42.2 and 42.6 grains H4350.  Velocity spread for that charge range was 10 fps.  I've loaded some @ 42.3 and will hopefully shoot them tomorrow.

[Danbonzo]

^ You get your money's worth with Hawk Hill and SPR.  Looks like you've got a hammer on your hands. Nice shooting.
Dan

[Vartarg]

Tikka T3X A1 in 6.5CM, NF 15-55X52 riflescope, Atlas bipod and Gemtech Sandstorm 7.62 supressor.