News:

To support the forum with your donation, please check https://tinyurl.com/4vv24dup.

Main Menu

IMR 4064

Started by patjack, July 26, 2011, 04:58:03 PM

Previous topic - Next topic

patjack

Anyone used IMR 4064 with 6.5 cm, I have lots of it and noticed that IMR/HODGDON do show it in their load data, but hornady don't,
all replies would be welcome as still very undecided in what I'm going to load.

NewShooter

#1
95 GR. HDY V-MAX     IMR     IMR 4064     .264"     2.670"     38.0     3009     45,800 PSI     41.6     3281     58,700 PSI          
100 GR. NOS BT     IMR     IMR 4064     .264"     2.760"     36.0     2873     46,500 PSI     40.0     3135     59,400 PSI          
107 GR. SIE HPBT     IMR     IMR 4064     .264"     2.780"     36.0     2799     44,100 PSI     39.7     3081     58,500 PSI          
120 GR. HDY A-MAX     IMR     IMR 4064     .264"     2.670"     35.0     2666     47,200 PSI     38.9     2903     59,800 PSI          
123 GR. SIE HPBT     IMR     IMR 4064     .264"     2.670"     35.0     2673     48,300 PSI     38.8     2882     58,300 PSI          
140 GR. HDY A-MAX     IMR     IMR 4064     .264"     2.820"     32.0     2393     48,700 PSI     35.7     2603     60,800 PSI          
142 GR. SIE HPBT     IMR     IMR 4064     .264"     2.780"     34.6     2503     52,400 PSI     36.8     2614     59,500 PSI          

NewShooter

Did that post good enough to make sense??

patjack

Thanks, where did the data come from, IMR/Hodgdons site, what I was hoping that a member had some experiance of using it, bit of along shot I know, Thanks again.

NewShooter


RifleworX

Have no exp. w/ it but 4064 might would be a good choice in the creedmoor w/ really light pills - like 90-100grainers .
 Maybe I should play w/ some 95Vmax & 4064
 
 I also suspect that BL-C2 and 8208XBR woould work Well w/ the little pills

 I got lots of all 3 powders on hand - might get a box o 95vmax and play when I get time -- BUSY ROUND HERE RIGHT NOW!!!!!!!!!!!!!!
The older I get the less I know!!

hrt4me

any other feedback? I just got a 6.5 Creedmoor and have lots of IMR 4064, so I am considering this load:

140 GR. HDY A-MAX     IMR 4064     .264"     2.820"     32.0     2393     48,700 PSI     35.7     2603     60,800 PSI

bghunter

I use imr4064 with 95gr. V Max 40.0 grs. shoots nice so far I like it ...later