News:

To support the forum with your donation, please check https://tinyurl.com/4vv24dup.

Main Menu

sites for used 6mm BR reloading dies

Started by Gone Fishin, January 04, 2022, 10:44:53 PM

Previous topic - Next topic

Gone Fishin

I posted about the 6mm BR build a little while back,and got a lot of good help.  I have just about everythng together to be able to make some ammo, but still cant locate Forster 6mm BR dies.   I am sold on their ultra seater with the 25 thous adjustment compared to Redding or WIdden.   Just want a full length sizer die...no bushing
Are there sites online that have a a buy/sell/trade?  I have looked at ebay and amazon and just started looking at sniper hide.  Hate to pay $20 just to be able to advertise on sniper hide.

Clarification on the dies please:    Isnt it true that the actual name should be 6mm BR Norma with the longer neck from the 6mm BR to hold the longer bullets?.  Wont the dies work if they have the norma or not?  WIdden says BR Norma, but Redding and Forster dont.  Thanks

autoxforfun

Here is another die vendor that makes really good stuff and they are a bit more expensive.  I have their sizing die for 6 Dasher and think it does a great job.  They also make a seating die that I don't have and so can't comment on how well it works  Here are the links to the two dies.  They both appear to be in stock.

https://www.bulletcentral.com/product/micron-precision-series-threaded-seater-die/

https://www.bulletcentral.com/product/micron-die-series-sizer-die/
Bob
If everything seems under control......you're just not going fast enough

jvw2008

" Clarification on the dies please:    Isnt it true that the actual name should be 6mm BR Norma with the longer neck from the 6mm BR to hold the longer bullets?.  Wont the dies work if they have the norma or not?  WIdden says BR Norma, but Redding and Forster dont.  Thanks"

The terminology 6 BR typically refers to the 6 BR Norma case. It can be confused with the 6 BR Remington which is similar but not interchangeable.

jvw2008


boltman13

IF you are willing to switch from a Forster full length sizing die to their Shoulder Bump Bushing Die I have one I'll sell along with 4 bushings, 0.267, 0.268, 0.269, and 0.270.  New one with 3 bushings at Midway is $96.99.  I'll sell it for $50.00 and pay postage.  PM me if you are interested.  A Wilson micrometer seating die is a great seating die, usually giving no, or very little run out.